Help

Everything about the engine
Benutzeravatar

Topic author
Big Ade
Beiträge: 222
Registriert: Sonntag 25. März 2012, 16:42
Vorname: Ade
Wohnort: Sheffield, South Yorkshire, England
Alter: 68

Help

Beitrag von Big Ade » Samstag 31. Oktober 2015, 11:56

David's bike is still sick.

He needs help, the front bevel gear shaft has sheared (connects to U/J) and he needs a guide tool to accurately drill the shaft.

Does anybody have one of these to sell, loan or donate?

The dog is dead but we can revive him with your help.

Ade

Benutzeravatar

Axman
Moderator
Beiträge: 4098
Registriert: Mittwoch 5. Februar 2003, 13:00
Vorname: Axel
Wohnort: 58708 Menden
Alter: 74
Kontaktdaten:

Re: Help

Beitrag von Axman » Sonntag 1. November 2015, 08:45

Hi Ade,

I´ll translate your request reg. the guide-tool. That´ll be better than hoping that someone here understands nwhat you need :wink:

bexst regards

Axman

Added in 32 seconds:
Hi Ade,

I´ll translate your request reg. the guide-tool. That´ll be better than hoping that someone here understands nwhat you need

best regards

Axman
...es ist ein Zeichen von Intelligenz seine Grenzen zu kennen..

Benutzeravatar

Topic author
Big Ade
Beiträge: 222
Registriert: Sonntag 25. März 2012, 16:42
Vorname: Ade
Wohnort: Sheffield, South Yorkshire, England
Alter: 68

Re: Help

Beitrag von Big Ade » Montag 2. November 2015, 20:00

Axeman

Thanks for doing that for me, I struggle to read/write and speak German as do all Brits. Google translate kind of works when viewing the German forum but even then it throws me a bit.

Glad to see you are still involved on the forum to share your experience, knowledge and help.

Be healthy, happy and safe my friend.

Ade

Added in 18 seconds:
Axeman

Thanks for doing that for me, I struggle to read/write and speak German as do all Brits. Google translate kind of works when viewing the German forum but even then it throws me a bit.

Glad to see you are still involved on the forum to share your experience, knowledge and help.

Be healthy, happy and safe my friend.

Ade

Benutzeravatar

Topic author
Big Ade
Beiträge: 222
Registriert: Sonntag 25. März 2012, 16:42
Vorname: Ade
Wohnort: Sheffield, South Yorkshire, England
Alter: 68

Re: Help - Giude Tool

Beitrag von Big Ade » Dienstag 15. Dezember 2015, 19:05

Guys

We are struggling this end, we have managed to get a tool made on a 3D printer but I fear it will be too soft. Machine shops will not entertain programming their CNC kit for a one off unless we pay lots of money (many many euros).

I am pleading for help, I will pay money, favour or whatever (the sphincter, as always, is out of bounds).

Has any body got this tool to sell, lend or donate? We will treat it with respect and return it as soon as we are done with it.

Oh and Merry Christmas to all our readers and ride safe and be lucky in the future.

Ade

Benutzeravatar

Topic author
Big Ade
Beiträge: 222
Registriert: Sonntag 25. März 2012, 16:42
Vorname: Ade
Wohnort: Sheffield, South Yorkshire, England
Alter: 68

Re: Help

Beitrag von Big Ade » Samstag 26. Dezember 2015, 20:10

Massive, massive thanks to Eddie who has so very kindly sent me the tool AND a drill!

Eddie you are a top man. thanks so very much for helping us out, I will reurn the tool to you as soon as possible.

It's good to know we have such good friends in Germany.

Ade

Benutzeravatar

Axman
Moderator
Beiträge: 4098
Registriert: Mittwoch 5. Februar 2003, 13:00
Vorname: Axel
Wohnort: 58708 Menden
Alter: 74
Kontaktdaten:

Re: Help

Beitrag von Axman » Sonntag 27. Dezember 2015, 08:24

:elephant: :elephant: :elephant:
...es ist ein Zeichen von Intelligenz seine Grenzen zu kennen..

Benutzeravatar

Eddie
Beiträge: 3175
Registriert: Montag 14. April 2003, 20:23
Vorname: Ralf
Wohnort: Wesseling
Alter: 57

Re: Help

Beitrag von Eddie » Montag 4. Januar 2016, 17:00

No matter, Ade.

Nice, that I can help you with your problem and I hope, it will works. But it`s a german drill and you have to turn it in the right direction! :lol:

Best regards...
Es liegt in der Natur des Menschen vernünftig zu denken und unvernünftig zu handeln.


marksimcox
Beiträge: 2
Registriert: Samstag 11. März 2017, 02:27
Vorname: Mark
Alter: 55

Re: Help

Beitrag von marksimcox » Samstag 12. August 2017, 12:42

Hi,
My Bulldog is not running well.
After 600 miles with the standard pipes on and running well I decided I wanted a raunchier exhaust note.
So I bought a set of SP engineering 'shorty' pipes. Beautiful things but . . .
To cut a long story short I then bought a set of Fuel pipes and the problem remains.
The thing is we are convinced the new pipes are a 'red herring' and have no baring on the problem.

So, to the crux of the matter. When I try and use the performance the motor chokes. Initially its ok and will rev out then it feels like its running out of petrol and will * about and stutter until I'm forced to pullover whereupon the motor will die and refuse to re-start for 5 minutes or so. It feels like its trying to run on 1 piston? If I keep the revs below 3000rpm its ok but if I exceed that the poor running reappears.
My bike shop man, Dave, has given it a full service and completely stripped, cleaned and reassembled the carb.
There was some muck in there which has been removed but there was no evidence of water ingress. I have also tried riding the bike with the fuel cap open in case the breather was blocked, but nothing is helping.

Any ideas?


marksimcox
Beiträge: 2
Registriert: Samstag 11. März 2017, 02:27
Vorname: Mark
Alter: 55

Re: Help

Beitrag von marksimcox » Donnerstag 12. April 2018, 12:31

Hi,
I guess this site is not very active as I never received a reply!
So, if there is anyone out there you might like to know the problem turned out to be a build up of 'sludge' in the bottom of the tank, which, under acceleration would be drawn into the fuel line, thereby choking the motor.
Clean it out and problem solved.
Since then I have also had the dreaded starter motor failure.
This was relaced at a huge cost, in excess of £550-00, and my garage did me a good (vat free for cash) deal.
I believe the replacement, a genuine Yamaha item, to be an upgraded part. So, I am trusting I won't have to do that again. Yamaha's 950 engine in their custom bike and its derivatives is the same engine, with a slightly lower capacity obviously, and I can't believe Yamaha would still be selling a bike with a dubious starter.
I replaced the Pirelli's with Bridgestone Battlax T30's which are performing well.
The Givi rack and topbox give loads of practicality and peace of mind to my daughter when she rides pillion.
I do, however, take the 'box off as much as I can as it looks so much better without it.
I ran it through the winter, after covering it in ACF-50, and the finish has held up brilliantly.
The motor returns approx 45mpg.
And the Fuel pipes sound lovely.
Its a great bike, I love it.

Mark

Benutzeravatar

WullDee
Beiträge: 5272
Registriert: Donnerstag 21. September 2006, 14:32
Vorname: Waldi
Wohnort: Steinhuder Meer
Alter: 51
Kontaktdaten:

Re: Help

Beitrag von WullDee » Donnerstag 12. April 2018, 18:55

Hi Mark,
indeed, the english section is not visited really often.
But many thanks for your feedback - there has been a topic in the past dealing with the coating of the fuel tank which has been renewed by using "Kreem", but I can't recall when/where it was.
Good to hear that your dog finally works as expected!
Bild
Die kürzeste Strecke zwischen zwei Punkten ist ... eine verdammte Schande!

Meine Videos bei YouTube: https://www.youtube.com/user/WullDee

Antworten